Skip to main content
Bald Mountain Loop via Tudor and Tamposi Trails route map
Difficulty: ModerateLoop

Bald Mountain Loop via Tudor and Tamposi Trails

Antrim, New Hampshire

2.6 mi

Distance

997 ft

Elev. Gain

1h 18m

Est. Time

Loop

Route Type

Moderate

Difficulty

About This Trail

Bald Mountain Loop via Tudor and Tamposi Trails is a loop trail in Hillsborough County, New Hampshire. It is 2.6 miles long and gains 997 feet. The nearest town is Antrim, New Hampshire, about 3 miles away in a straight line.

From the trail data on this page.

Trail Conditions

Trail Conditions

Unknown

We have no current condition data for this trail. Check with the operator before you go, and submit a report below if you've been recently.

No recent condition reports. Be the first to share what you see on the trail.

Elevation Profile

Min:360 ft
Max:623 ft
Gain:304 ft
Loss:304 ft
Elevation profileA line rising and falling between 360 ft and 623 ft across 2.6 mi along the route, drawn from start to end.360 ft448 ft535 ft623 ft0.0 mi0.7 mi1.3 mi2.0 mi2.6 mi

Elevation at the labelled points along this route
PointDistance from startElevation
Start0.0 mi360 ft
High point1.6 mi623 ft
End2.6 mi360 ft

Trail Details

Route Type
Loop

Official sources & verification

Verify before you go

Where it is

Nearest town:
Antrim, NH · about 3 mi away
County:
Hillsborough County, NH

Nearest town and county from U.S. Census Bureau place records and county boundaries.

We display cached information from agency feeds. Hours, fees, permits, closures, fire restrictions, and conditions change without notice. Outdoors is not the permitting authority. Confirm current conditions for this trail using the links above before you go — you are responsible for compliance. Last verified by us: May 23, 2026. Our copy is more than a month old — please reconfirm with the agency before relying on it.Spot an error in our data?

Reviews

No reviews yet

Be the first to share your experience and help others plan their visit.

Legacy import — verify before navigating

Path geometry came from our pre-launch legacy database. Routes have not yet been re-verified against the operator and may differ from the actual trail.

Spot an error in our data on Bald Mountain Loop via Tudor and Tamposi Trails?